--- title: "Replace Device - icom Connectivity Suite - VPN" slug: "icom-connectivity-suite-vpn-device-replace" updated: 2026-09-10T10:53:50Z published: 2026-09-10T10:53:50Z canonical: "docs.insys-icom.com/icom-connectivity-suite-vpn-device-replace" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.insys-icom.com/llms.txt > Use this file to discover all available pages before exploring further. # Replace Device - icom Connectivity Suite - VPN The *Replace device* dialog opens when you click in the [device information](/kb/docs/icom-connectivity-suite-vpn-device-information) on the *Replace device* button. This function makes it easy to replace an INSYS icom router with a new router running the same operating system – **icom OS** or **INSYS OS**. The existing settings for VPN connectivity are automatically adjusted and carried over. A similar procedure is available for upgrading from an INSYS router running the INSYS OS operating system to a router running icom OS, which is also described below. A detailed description of this process, including manual configuration, can be found in this [Configuration Guide](/kb/docs/replacing-an-insys-router-with-insys-os-by-a-router-with-icom-os). ## Replacing a router To replace an INSYS icom router with a new router running the same operating system, proceed as follows: 1. Click in the [device information](/kb/docs/icom-connectivity-suite-vpn-device-information) of the router to be replaced on the *Replace device* button behind the serial number. 2. Enter the serial number of the **new** router in the *Replace device* dialog and click on Confirm. 3. Replace the old router with the new one. 4. Now, commission the new router using the Startup wizard as described in this [Configuration Guide](/kb/docs/configuring-an-insys-router-with-icom-os-for-a-connection-to-the-icom-connectivity-suite-vpn-en) (for **icom OS**) or this [Configuration Guide](/kb/docs/configuring-an-insys-router-with-insys-os-for-a-connection-to-the-icom-connectivity-suite-vpn-en) ( for **INSYS OS**). Once it has been set up, the new router will reconnect to the **icom Connectivity Suite – VPN**. ## Upgrading a routers with INSYS OS by a router with icom OS To replace an INSYS icom router running INSYS OS (MoRoS, EBW, IMON) with a new router running icom OS (MoRoS.neo, MRX, MRX.neo, MRO, ECR, SCR, MIRO), proceed as follows: 1. Click in the [device information](/kb/docs/icom-connectivity-suite-vpn-device-information) of the router to be upgraded on the *Upgrade to an INSYS router with icom OS* button behind the *Type*. 2. Enter the serial number of the **new** router in the *Upgrade to an INSYS router with icom OS* dialog. 3. Check the network settings for the new router as described in this [Configuration Guide](/kb/docs/adding-an-insys-router-with-icom-os-to-the-icom-connectivity-suite-vpn-en), then click on Create. 4. Replace the old router with the new one. 5. Now, commission the new router using the Startup wizard as described in this [Configuration Guide](/kb/docs/configuring-an-insys-router-with-icom-os-for-a-connection-to-the-icom-connectivity-suite-vpn-en). Once it has been set up, the new router will reconnect to the **icom Connectivity Suite – VPN**. End points, Navigator and licence settings remain untouched. The serial number can be taken from the label on the router or its menu item *Status* → *Dashboard*.