Doppelte Verbindungsprüfung mit Ping und Auslösen einer Aktion - icom OS Router

-----LUA-----

-- variable definition:
PING_ADDRESS1 = "10.10.0.1" -- replace this with your first IP address
PING_ADDRESS2 = "10.11.0.1" -- replace this with your second IP address
TRY = 3 -- this defines that an unsuccessful check will be repeated 3 times

-- aux flag
SUCCESS = 0 -- this flag is used to differentiate success (1) and no success (0)

-- ping check

for LOOP = 1 , TRY do
	a, b, c = pcall(cli, "help.debug.tool=ping -c 1 " .. PING_ADDRESS1) -- lua script that pings to address 1 and returns information to the variables a, b and c
	if c == 0 then -- means that the ping to address 1 was successful
		SUCCESS = 1 -- sets the success flag to 1
		cli_log("LUA ping - " .. LOOP .. ". check to target " .. PING_ADDRESS1 .. " successful") -- outputs the success message in the log
		-- device is online, exit lua and the script
		return -- exits the loop
	else -- continues the script in case of no success
		a, b, c = pcall(cli, "help.debug.tool=ping -c 1 " .. PING_ADDRESS2) -- lua script that pings to address 2 and returns information to the variables a, b and c
			print ("LOOP: " .. LOOP .. " - b:" .. b .. " c:" ..c) -- outputs the parameter in the cli
		if c == 0 then -- means that the ping to address 2 was successful
			SUCCESS = 1 -- sets the success flag to 1
			cli_log("LUA ping - " .. LOOP .. ". check to target " .. PING_ADDRESS2 .. " successful") -- outputs the success message in the log
			-- device is online, exit lua and the script
			return -- exits the loop
		else -- continues the script in case of no success at the end of the final number of loops
			cli_log("LUA ping - " .. LOOP .. ". check, both failed") -- outputs the no success message in the log
		end
	end
end

if SUCCESS == 0 then -- means that no ping was successful, the following commands will be executed
	cli_log("LUA ping - restarting modem") -- outputs this information in the log
	cli("help.debug.modem_state.name=lte2") -- defines the modem to be restarted
	cli("help.debug.modem_state.state_change=turn_off") -- defines that the modem is to be turned off
	cli("help.debug.modem_state.submit") -- submits above command to the router
end

-----LUA-----
exit

events.timer.timer.add
events.timer.timer[1].active=1
events.timer.timer[1].description=Timer for dual ping check with Lua
events.timer.timer[1].type=interval
events.timer.timer[1].interval_hh=00
events.timer.timer[1].interval_mm=10

events.event_config.event.add
events.event_config.event[last].active=1
events.event_config.event[last].description=Dual ping check with Lua
events.event_config.event[last].event_type=ev_timer
events.event_config.event[last].event_timer_name=timer1
events.event_config.event[last].event_action_type=act_ascii
events.event_config.event[last].event_action_ascii=CG_m3_lua_connection_check_script.txt

netfilter.ip_filter.rule.add
netfilter.ip_filter.rule[last].rule_active=1
netfilter.ip_filter.rule[last].rule_desription=Ping queries sent by the router
netfilter.ip_filter.rule[last].rule_direction=output
netfilter.ip_filter.rule[last].rule_protocol=icmp
netfilter.ip_filter.rule[last].rule_output_if=all
netfilter.ip_filter.rule[last].rule_ipversion=all

administration.profiles.activate