FAQ - INSYS OS Router

Prev Next
  • Published on May 27, 2026
No, it’s not possible. These firmware versions are   incompatible   with each other.
  • Published on May 27, 2026
If your device has a firmware version of 1.x.x the update   cannot   be carried out! In the event of large version jumps, incremental updates are first necessary.   These updates are available   here : If your device has ...
  • Published on May 27, 2026
Some e-mail service providers don’t support   TLS versions 1.0 and 1.1   anymore. Please update your device to the lates firmware, in which we implemented   TLS versions 1.2 and 1.3 . The latest firmware is found under the f...
  • Published on May 27, 2026
No, this is not possible. The two operating systems are incompatible with each other. You have 2 options: You manually configure your icom OS device following the settings in your INSYS OS device. Our   Customer Service Center   ma...
  • Published on May 27, 2026
With the   INSYS OS , the cellular interface   cannot   be used while the LAN(ext) port is in   "DHCP"   or   "static"   mode. Please either turn the port   off , or set it to   "brid...
  • Published on May 27, 2026
This is not possible with INSYS OS devices. Our new icom OS devices, such as the MRX, MRO, ECR, SCR and MIRO are capable of simultaneously running multiple OpenVPN and even IPSec tunnels. Test our icom OS devices free of charge:...
  • Published on May 27, 2026
You can create a support packet under System/Download/Create new support packet at the bottom of the page.
  • Published on May 27, 2026
Under the menu   GSM/GPRS, UMTS, or WWAN   under   Terminal   type in your   PUK   and your new   PIN   number in the following format: AT+CPIN="PUK","NEW PIN" So for example: AT+CPIN="1234...