FAQ - icom OS Router

Prev Next
  • Published on May 27, 2026
Did you try a connection via HTTP S ? For security reasons, the HTTP connection was deactivated in default settings with version 4.4 of the firmware ( Release Notes ). Your device should be accessible via an HTTPS connection. See also   ...
  • Published on May 27, 2026
If a ping returns this error message during   debugging , the router's firewall is probably blocking the ICMP packets. Add a new   firewall rule   on the     Network   →   Firewall / NAT   page wit...
  • Published on May 27, 2026
Click in the new user interface on the    Status → Support Packet page on CREATE SUPPORT PACKET  . Click in the classic user interface on the Help → Support page on Create new support packet .
  • Published on May 27, 2026
If you've configured your device using the   startup wizard   and no firewall rules or other settings are missing, then make sure you entered the proper   Access Point Name   under   Interfaces/LTE . For some p...
  • Published on May 27, 2026
As of   Version 7.8   of the   icom OS   we do   not   support this mode yet, nor is it planned at the moment to implement this feature.
  • Published on May 27, 2026
We do not log such metrics in our routers. We only temporarily hold the traffic size of the interfaces. However, these values are reset if the interface, or the router itself restarts . You find the traffic produced by an individual interface du...
  • Published on May 27, 2026
The blinking gear   indicates that the profile opened in the router differs from the profile running in the router. A click on the gear or Activate profile  button activates the opened profile, i.e. it becomes the running pro...
  • Updated on Jul 7, 2026
  • Published on May 27, 2026
Port 1 of the card in slot 1 (leftmost) is assigned to IP net 1 (configuration network) in default settings (for routers with 5- or 4-port switch; for routers with 2-port switch, port ETH1 is assigned to IP net 1). This local network has the static ...
  • Updated on Jun 23, 2026
  • Published on May 27, 2026
The internal clock of the router should always be set correctly to ensure that time-controlled events are processed precisely to the desired time, system messages are dated correctly and certificates are within their validity period. A regular synch...
  • Published on May 27, 2026
If the settings on your router are otherwise correct, please check the   NTP version   used by your NTP server. Our firmware uses   NTPv4 , which is backwards compatible with   NTPv3 . However, some   NTPv3   se...
  • Published on May 27, 2026
The router allows a very complex configuration to cover almost all application cases custom-made. This can cause a complex troubleshooting – in particular for configurations made by third parties. A comfortable troubleshooting option is provided by...
  • Published on May 27, 2026
In contrast to a local network (LAN), a WAN connection will not be started immediately. A WAN connection will then be established, if a WAN chain, which contains the respective WAN interface, is started. The status of the existing WAN chain is dis...
  • Published on May 27, 2026
If you have a router that has already been configured and you only want to change the WAN connection, i.e. Internet access, you can simply change the WAN interface. To do this, proceed as follows: Add on the     Network → Interface...
  • Published on May 27, 2026
It can be useful due to reasons of security to block an IP version (IPv4 or IPv6) for data traffic completely. Proceed as follows for this: Activate the IP filters (firewall) of the IP version to be blocked (   Network → Interfaces → ...
  • Published on May 27, 2026
In order to dispatch a message via e-mail within an   action , it is necessary to configure the e-mail account in the router and add appropriate   netfilter   rules. Refer to this   Configuration Guide   to find ...
  • Published on May 27, 2026
If a   container   cannot be accessed via its IP address, it is recommended to check the following settings: On the   Container → Container   page in the   Container   section: Is the container present a...
  • Published on May 27, 2026
Yes, this is possible. Just keep in mind that if the other device is lacking a feature, for example DSL or LTE, those settings will be   skipped   over during the import.
  • Published on May 27, 2026
See this   Configuration Guide   or this YouTube tutorial video:
  • Published on May 27, 2026
This is due to the fact that you are trying to access an entry that   does not exist . Each entry, for example a netfilter rule, has its own   index number . In this case, you are trying to access the 6th element of the list but only 5 e...
  • Published on May 27, 2026
This generally means a DNS error , however a routing conflict can lead to this as well: Is your Internet connection running over Ethernet ? Make sure no local firewall is blocking the tunnel establishment to the server. Is the OpenVPN s...
  • Published on May 27, 2026
icom OS supports   port forwarding . Create a port forwarding rule as outlined below: Add under     Network   →   Firewall / NAT   a new Destination NAT rule. Configure as   Type   Port...
  • Published on May 27, 2026
icom OS supports   IP forwarding /1-to-1 NAT. A comprehensive configuration example can be found in this   Configuration Guide .
  • Published on May 27, 2026
There is no command reference, but the command can easily be found out as described here . See also this video tutorial:
  • Published on May 27, 2026
See this   Configuration Guide .
  • Published on May 27, 2026
After decommissioning a   MIRO   device, it is necessary to upload the special   kernel milestone   file onto it. Please contact our support team at   support@insys-icom.de   to receive this file. Don...
  • Published on May 27, 2026
Click in the new user interface on the    Administration → Debugging page on OPEN DEBUG TOOLS  , select the Tool AT command , enter the Parameter AT+CPIN="PUK","NEW PIN" (e.g. AT+CPIN="12345678","0000" ), select t...
  • Published on May 27, 2026
The Auto-Update Server operated by INSYS icom has been shut off and will not update your router any more. Refer to this note for more information and how to continue to provide your router with the latest updates.
  • Published on May 27, 2026
The PKCS12 file could have been created with PBE-SHA1-RC-40 , PBE-SHA1-3DES or other encryption algorithms, which are classified as insecure on our devices from firmware version 7.3 and onwards. https://icom-os.releasenotes.io/release/NuQrd-...
  • Published on May 27, 2026
Each   profile   has a unique hash to ensure its integrity. The hash of a profile changes when the profile or firmware is changed. As the hash is also device-specific, two identical devices with identical profiles and firmware also ha...
  • Published on May 27, 2026
The MIRO does not have a buffered real-time clock and retrieves its time after a restart either using the cellular network (only with inserted SIM card and correct stored or disabled PIN, Status indication: RTC) or from the latest entry of the last...
  • Published on May 27, 2026
When using our industrial routers for connecting to fiber optic networks, MRX Fiber or MRX with MRcard Fiber, a careful selection of the SFP transceiver used is crucial for the performance of the router and a stable connection. When selecting the S...
  • Updated on Nov 5, 2026
  • Published on May 27, 2026
Each router has a certain number (see table below) of MAC addresses, which are assigned in sequence to each configured IP network. Beyond that, the MAC address is generated randomly. Alternatively, the MAC address can also be assigned user-defined w...
  • Published on May 28, 2026
In Access point mode, the router provides its own WiFi network. This is particularly useful for setup, maintenance, or temporary on-site access when you want to connect to the device without additional cabling. In Client mode, however, the route...
  • Published on May 28, 2026
With Dual SIM Single Standby (DSSS) , the device contains two SIM cards, but only one SIM is active at a time. The second SIM remains on standby and is used when a switch is necessary. The added value, therefore, lies not in parallel operation, b...
  • Published on May 28, 2026
If maximum availability is the top priority, we generally recommend using Provider A as the primary SIM and Provider B as the fallback SIM . This reduces the risk of both cards being affected by the same network outage or backend issues. If, on ...
  • Published on May 28, 2026
Segmenting local IP networks using VLANs and managed switch functions is a good idea when the router, acting as a central gateway, needs to clearly separate multiple communication environments—such as IT , OT , service access , or even a separa...
  • Published on May 28, 2026
RS-485 and RS-232 remain relevant in industrial settings because many existing devices, field devices, and sensors still communicate via serial interfaces. This is particularly true in legacy and retrofit scenarios , where existing infrastructu...
  • Published on May 28, 2026
Secure Boot is not a feature that you need to actively use; rather, it is a platform security mechanism. The device will only boot using approved and signed INSYS firmware, and the entire boot process is cryptographically secured. This reduces the r...
  • Published on May 28, 2026
With containers (LXC) , the router becomes a local application platform. This is particularly useful for clearly defined applications such as protocol gateways , data loggers , edge analytics , or customer-specific logic . This allows data and ...
  • Published on May 28, 2026
MOROS.neo is a good choice if your application can be reliably supported by 4G , Ethernet , and optional WiFi . This is already entirely sufficient for many industrial applications—for example, when secure remote access, stable communication, a...
  • Published on May 29, 2026
MOROS.neo is particularly well-suited to decentralised systems, secure remote access, existing Wi-Fi infrastructures, dual-SIM redundancy and the integration of OT and legacy systems. The platform is ideal when reliability, remote maintenance and ...
  • Published on May 29, 2026
4G is the established cellular network and remains a very good and often entirely adequate solution for many applications in remote maintenance, monitoring and telemetry. 5G NSA (Non-Stand-Alone) already utilises 5G radio technology, but s...
  • Published on Jun 1, 2026
Whether 5G can be used effectively in your application depends essentially on four factors: Your location must have actual 5G coverage – not just on the network map, but in the specific installation environment Your tariff and SIM must be enab...
  • Published on Jun 1, 2026
MRX.neo is particularly well suited to applications where greater scalability, 5G capability or increased flexibility are required from the outset. The platform is ideal when requirements may grow, interfaces change during the course of the projec...
  • Published on Jun 2, 2026
The Access Point Name (APN) is the name of the access point that a cellular device uses to connect to a mobile network provider’s network. Providers offer many different networks for IP communication, each with very different access options. This...
  • Updated on Jun 17, 2026
  • Published on Jun 15, 2026
Yes. The shutdown of 2G does not spell the end of SMS. SMS messages can also be transmitted via modern 4G (LTE)/5G mobile networks. Many existing applications – such as fault reports from sewage treatment plants, waterworks, pumping stations or othe...
  • Updated on Sep 25, 2026
  • Published on Jun 18, 2026
Yes, in principle, this is a reasonable upgrade path for existing MRX installations . The biggest advantage lies in investment protection : In many cases, existing infrastructure, the familiar platform, and existing concepts can continue to be use...
  • Updated on Jul 23, 2026
  • Published on Jul 16, 2026
When a WAN connection or a connection to another network via an Ethernet interface is established on a router of the MRX.neo or MOROS.neo series, the maximum interface performance is achieved on Port ETH 4 .
  • Updated on Aug 6, 2026
  • Published on Aug 6, 2026
The cellular interfaces have been renamed from lteX to cellularX with icom OS 10.0 , for example the interface lte2 has changed to cellular2 . The sequence number X refers to the slot where the cellular card is inserted in an MRX router or...
  • Updated on Oct 26, 2026
  • Published on Sep 24, 2026
The latest firmware for your router is available on our firmware page . Each firmware packet is available in different versions. This Configuration Guide explains how to manually update your router with the latest firmware. Firmware packets mu...
  • Updated on Oct 29, 2026
  • Published on Oct 29, 2026
Who is concerned? Wenn Sie die 450connect-Priorisierungstarife M2M Premium , M2M Business oder M2M Basic nutzen und Ihr LTE450-Router vor dem 31.12.2026 geliefert wurde, müssen Sie die Firmware des Mobilfunk-Modems aktualisie...